10 Steps To Properly Clean An Industrial Pressure Washer
Knowing how to clean an industrial pressure washer properly is extremely important because if it is not done correctly, it could cause many problems for you and your equipment. Here are the steps you need to take to clean your pressure washer properly.
Step 1 – Read The Owner’s Manual
You will first want to read the owner’s manual that came with your pressure washer to know exactly what you need to do to clean it. Just because you are not using it for a while does not mean that you should not clean it.
Step 2 – Drain The Tank
The first thing you will want to do after reading the owner’s manual is drain the tank of all the water, and then you will want to remove any of the hoses and the pressure regulator. This is important because you do not want to have any water in the tank. After all, it could freeze and expand and damage your equipment.
Step 3 – Remove The Pump
The next thing you will want to do is remove the pump from the pressure washer, and then you will want to pump out all the water from it, and then you will want to remove any of the filters or the screens. You will also want to make sure that you clean all of these components with soap and water.
Step 4 – Remove The Valve
Remove the valve from the pressure washer, and clean it with soap and water. You will also want to make sure that you remove any of the screens or filters.
Step 5 – Remove The Hoses
After removing the valve, you will need to remove the hoses from the pressure washer, and then you will want to clean all of them with soap and water. You will also want to make sure that you remove any of the screens or filters.
Step 6 – Remove The Engine
Remove the engine from the pressure washer, and drain all of the oil from it; then, you will want to remove the spark plugs and the carburetor. You will also want to make sure that you clean all of these components with soap and water.
Step 7 – Remove The Transmission
Remove the transmission from the pressure washer, and then you will want to drain all of the oil from it, and then you will want to remove the transmission filter. Finally, you will also want to make sure that you clean all of these components with soap and water.
Step 8 – Remove The Pump
The next thing that you will want to do is remove the pump from the pressure washer, and then you will want to drain all of the oil from it, and then you will want to remove the pump filter. You will also want to make sure that you clean all of these components with soap and water.
Step 9 – Remove The Tank
The next thing that you will want to do is remove the tank from the pressure washer, and then you will want to drain all of the water from it, and then you will want to remove the tank filter. You will also want to make sure that you clean all of these components with soap and water.
Step 10 – Remove The Unloader
For the final step, you will need to remove the unloader from the pressure washer, then you will want to drain all of the oil from it, and then you will want to remove the unloader filter. You will also want to make sure that you clean all of these components with soap and water.
